項目展示Project Display
模擬製動試驗檯
Simulated brake test bench
制動系統測試臺用於制動系統的單個零件和連接質量驗證。该制动系统测试台可以模拟现实条件下的制动系统,并且更易于更换部件,监控制动系统的性能要比在实际车辆中要好。
The brake system test bench is used for the brake system single part and connection quality validation. The brake system test bench enable simulating the brake system working in the reality condition, and easier to replace the components, monitor the brake system performance than in the real vehicle.
充電樁改造項目
Charging pile renovation project
將研發停車場當前使用的電動汽車充電支柱更換爲新的充電支柱(由供应商设计并经BBT-E-60 确认),并适用于 B 型 RCD 和断路器的直接安装。此新支柱必须适用安装一个和两个电动汽车充电墙盒。
Exchange of the current used EV(Electric Vehicle)-Charging pillars in the R&D parking lots to new charging pillars (designed by the supplier and confirmed by BBT-E-60), which are suitable for the direct installation of type B RCDs and circuit breakers together. This new pillar must be suitable for the mounting of one and also two EV-Wallboxes.
汽車生產線安裝項目
BIW Euipment Installation project
項目:偉巴斯特C346 生產線
時間:2016年01月-12月
項目描述 / Project Description:
項目包含,所有的夹具及传输設備的設計及製作。电气部分的整体设计与调试。
Date:01-12 ,2016
Project: C346 production line
The project includes the design and manufacture of all fixtures and transmission equipment. The overall design and commissioning of the electrical part.
汽車生產線安裝項目
BIW Euipment Installation project
項目:米其林輪胎生產線
時間:2017年01月-12月
項目描述:项目包含,所有的夹具及传输设备的组装调试。
Project:Michelin tire production line
Date:01-12,2017
Project Description: Theproject includes the assembly and commissioning of all fixtures andtransmission equipment.
德科(沈阳)斯米尔吸附模具脱模剂设备项目
DRÄXLMAIER Adsorption Mold Release Agent Equipment Project
時間:2017年10月-2018年2月
項目描述:項目包含,所有的夹具及传输设备的设计及制作。电气部分的整体设计与调试。
Date:10.2017-02.2018
Project Description: The project includes the design and manufacture of all fixtures and transmission
equipment. The overall design and commissioning of the electrical part.
華晨寶馬組裝車間–前臉裝配工裝國產化
BMW Brilliance Assembly Workshop – Localization of front face assembly tooling
時間:2016年3月-12月
項目描述:2016年3月起,我公司承接华晨宝马组装车间
–前臉裝配工裝國產化。
項目包含夾具的製作、安装调试。
Date:03-12,2016
Project Description: Since March 2016, our company has undertaken the localization of front face assembly tooling for the BMW Brilliance assembly workshop.
The project includes the production, installation and commissioning of the fixture.